Shared User Management System
Cressington 108A Carbon Coater:
IEN/IMAT Materials Characterization Facility
Contact Us
Equipment Description
The Cressington 108A Carbon Coater is typically used for coating SEM samples with less than 20nm uniform coating of conductive carbon. Once pumped down to operating vacuum pressures, a high current is passed through 2 carbon rods. An arc will occur at the point which the 2 rods touch and result in a sputtering-type deposition of carbon. The process, including pump-down, deposition and vent requires approximately 1 minute.
Institute Georgia Tech
Department IEN/IMAT Materials Characterization Facility
Reservation mode Schedule
Cressington 108A Carbon Coater
Days Past To Load:
My Time
Others' Time
How to schedule time on desktop
When you first view the calendar on your dashboard, it will show you your scheduled time along with any scheduled down events for tools you are a member of.  If you view the calendar on a tool page it will show you the above plus any scheduled events for that tool.  On your dashboard to select a tool click on the dropdown box at the top of the calendar section.

  Once you have selected a tool, or are on a tool page, to make a new reservation click and drag on the calendar from when you want your scheduled time to star to when you want your scheduled time to end.  This will open the schedule detail screen so that you can modify the schedule details and then save.
Schedule Rules
You are not associated with a rule set.
Billing Group Specific Scheduling Rules
BG Scheduling Rule NameToolBilling Group
Max Hours Per Day
No scheduling rules bgs to show...
0 records
No article associated with this equipment.
Send A Request
New Service Request