Heidelberg MLA150 no.1 (375/405):
IEN - Micro/Nano Fabrication Facility
In use by Sai Rakesh Moha Vangapandu since 10-21-2019 21:01:42
Information
Contact Us
Equipment Description

Heidelberg MLA 150 Maskless Aligner

The Heidelberg MLA150 has been specifically designed for easy operation and includes all our know-how on developing maskless lithography systems that we have gathered in the past 30 years. It offers all the capabilities that are required for single layer and multi-layer applications and because the MLA150 exposures are always non-contact it will even overcome some of the limitations of photomask based exposure technologies. 

What sets the MLA150 apart from other pattern generators is not only the usability but also the extreme exposure speed. Exposing an area of 100x100mm² with structures as small as 1 micron will take less than 10 minutes – independent of the fill factor or number of structures within this area. Alignment in multi-layer applications is achieved within 2 minutes by using three integrated cameras with varying resolution. Layer to layer alignment accuracy is better than 500nm and does not depend on the operator’s level of training.      

Experience the flexibility that the MLA150 Maskless Aligner will provide and expose your layout directly to accelerate your work in the areas of Life ScienceMEMSMicro-OpticsSemiconductor, Sensors, Actuators, MOEMS, Material Research, Nano-Tubes, Graphene, and any other application that requires microstructures.

Institute Georgia Tech
Department IEN - Micro/Nano Fabrication Facility
Sub Tool Of
Marcus Inorganic Cleanroom
Reservation mode Schedule
Days Past To Load:
My Time
Others' Time
How to schedule time on desktop
When you first view the calendar on your dashboard, it will show you your scheduled time along with any scheduled down events for tools you are a member of.  If you view the calendar on a tool page it will show you the above plus any scheduled events for that tool.  On your dashboard to select a tool click on the dropdown box at the top of the calendar section.

  Once you have selected a tool, or are on a tool page, to make a new reservation click and drag on the calendar from when you want your scheduled time to star to when you want your scheduled time to end.  This will open the schedule detail screen so that you can modify the schedule details and then save.
Schedule Rules
You are not associated with a rule set.
Billing Group Specific Scheduling Rules
BG Scheduling Rule NameToolBilling Group
Max Hours Per Day
No scheduling rules bgs to show...
0 records
No article associated with this equipment.
Send A Request
New Service Request